How to program your ADB remote to control your TV

  • Turn on your TV.
  • On the remote control, press TV once; it will blink once.
  • Press and hold RCU SETUP until the TV key blinks twice.
  • Type 9 9 1. The TV key will blink twice.
  • Press and release the CH+ key repeatedly, then stop when the TV turns off.
  • Press RCU SETUP once to lock in the code. The LED will blink twice to indicate that the code is saved.
  • Press STB.
  • Press RCU SETUP until STB blinks twice.
  • Enter “995”
  • Press POWER.
  • Press mode key for device you wish to turn on first (TV).
  • Press POWER.
  • Press mode keys for additional device to be turned on, such as DVD, then press POWER.  Repeat for as many devices as needed.
  • Press STB
  • Press RCU SETUP until STB blinks twice.

To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g., VCR, DVD, AUD, or STB) for the device you are searching for.

NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press RCU SETUP when the TV turns on.

CLICK HERE FOR A PRINTABLE REMOTE GUIDE